Manual Direct Pressure Blasting Equipment
- Pressure-pot feed sends abrasive out of the nozzle faster than a suction cabinet, so moulds, dies and heat-treated parts are cleaned in a shorter cycle. Five cabinet sizes take workpieces from 30 cm to 100 cm, all at 0.6–0.8 MPa with a 7.5 kW compressor. Auto pulse cartridge dust removal keeps the window clear without manual shaking. The operator works outside the cabinet with glass beads, ceramic beads, fused alumina or garnet. Custom sizes made to your drawing. To know more equipment.
Manual Direct Pressure Blasting Equipment
| Model | Outer Cabinet Size (MM) | Inner Cabinet Size (MM) | Suitable Workpiece (CM) | Fan Power (W) | Working Pressure (MPa) | Air Compressor (KW) | Dust Removal |
|---|---|---|---|---|---|---|---|
| NP-6050 | 900×600×1550 (L×W×H) |
500×600×500 | Within 30 CM | 250 W | 0.6–0.8 | 7.5 KW | Auto pulse cartridge dust removal |
| NP-9060 | 1200×900×1640 | 600×900×600 | Within 40 CM | 550 W | 0.6–0.8 | 7.5 KW | Auto pulse cartridge dust removal |
| NP-9080 | 1210×900×1740 | 800×900×700 | Within 60 CM | 550 W | 0.6–0.8 | 7.5 KW | Auto pulse cartridge dust removal |
| NP-1010 | 1410×1000×1790 | 1000×1000×750 | Within 80 CM | 750 W | 0.6–0.8 | 7.5 KW | Auto pulse cartridge dust removal |
| NP-1212 | 1600×1200×1890 | 1200×1200×800 | Within 100 CM | 750 W | 0.6–0.8 | 7.5 KW | Auto pulse cartridge dust removal |
Enclosure-based abrasive blasting falls under the ventilation requirements of OSHA 29 CFR 1910.94(a), which call for an exhaust system made of a hood or enclosure, ductwork, a dust collector, an exhauster and a discharge stack.



