Portable Sandblasting Machine
Portable Sandblasting Machine
A pressure pot on wheels for jobs the workshop cabinet can’t reach: steel structures, storage tanks, pipes and hulls. Six tank sizes from 0.1 to 0.8 m³ run at 0.8 MPa and clear 10–30 m² per hour depending on the model, with tank walls up to 8.0 mm for years of abrasive duty. Load garnet, alumina or glass beads as the surface calls for, with a 15–25 kW compressor alongside. To know more equipment.
Portable sandblasting machine
| Model | Full Capacity | Consumption Rate | Blasting Efficiency | Tank Thickness | Air Supply Requirement |
|---|---|---|---|---|---|
| HP-420# | 0.1 m³ | ≈15 min | ≈10 m²/h | 4.7 mm | Pressure 0.8 MPa 15 KW air compressor |
| HP-520# | 0.2 m³ | ≈15 min | ≈10 m²/h | 4.7 mm | Pressure 0.8 MPa 15 KW air compressor |
| HP-620# | 0.3 m³ | ≈30 min | ≈15 m²/h | 5.7 mm | Pressure 0.8 MPa 15 KW air compressor |
| HP-720# | 0.4 m³ | ≈40 min | ≈20 m²/h | 5.7 mm | Pressure 0.8 MPa 25 KW air compressor |
| HP-820# | 0.5 m³ | ≈50 min | ≈25 m²/h | 5.7 mm | Pressure 0.8 MPa 15 KW air compressor |
| HP-920# | 0.8 m³ | ≈70 min | ≈30 m²/h | 8.0 mm | Pressure 0.8 MPa 15 KW air compressor |
Enclosure-based abrasive blasting falls under the ventilation requirements of OSHA 29 CFR 1910.94(a), which call for an exhaust system made of a hood or enclosure, ductwork, a dust collector, an exhauster and a discharge stack.




