65 zirconia silicate beads Ceramic Grinding Balls
Description: 65 zirconia silicate beads (65% ZrO₂, commonly called 65 Zircon) are produced by titration forming and high-temperature sintering. The beads are fully dense with no internal pores or hollow cavities. With moderate density, good toughness and low wear rate, they serve as cost-effective universal grinding media. Widely used for wet grinding & dispersion of medium/low viscosity slurries; fine sizes can be applied for precision shot peening & polishing.
Note: More economical than 95% yttria stabilized zirconia beads. Not recommended for high-viscosity slurry or ultra-nano fine grinding. Custom sizes available.
-
-
Package:
- 1000 kg, Super Bag or Sack
- 25 kg (55 lbs), Paper Bag or Woven Polypropylene Bag or Drum
Chemical Composition
| Item | Typical Index |
|---|---|
| Zirconium Oxide (ZrO₂) | 64.0 ~ 66.0 % |
| Silicon Dioxide (SiO₂) | 34.0 ~ 36.0 % |
| Aluminium Oxide (Al₂O₃) | ≤1.0 % |
| Ferric Oxide (Fe₂O₃) | ≤0.15 % |
| Other impurities | ≤0.5 % |
Physical & Chemical Properties
| Item | Parameter |
|---|---|
| Mohs Hardness | 7.2 ~ 8.0 |
| Vickers Hardness HV | 900 ~ 1000 |
| True Density | ≥4.0 g/cm³ |
| Bulk Density | 2.4 ~ 2.6 g/cm³ |
| Water Absorption | <0.01 % |
| Color | Off-white / light cream |
| Shape | Perfect spherical beads |
| Chemical Stability | Excellent acid & alkali resistance, insoluble in water, stable in most slurry systems |
| Crushing Strength | ≥1000N (Φ1.8–2.0mm) |
Applications
| Size Group | Diameter Spec mm | Size Range | Applications |
|---|---|---|---|
| Large Size | Φ2.0~2.5, Φ2.5~3.0 | 2.0~3.0mm | Vertical sand mills & ball mills; coarse grinding of calcium carbonate, kaolin & zircon sand; ceramic glaze grinding; shot peening for castings |
| Medium-Large Size | Φ1.4~1.6, Φ1.6~1.8, Φ1.8~2.0 | 1.4~2.0mm | Medium grinding for paints, latex coatings & pesticide suspensions; mineral powder refining; basket sand mills |
| Medium Size | Φ1.0~1.2, Φ1.2~1.4 | 1.0~1.4mm | Dispersion for printing inks & organic/inorganic pigments; wet grinding of titanium dioxide & fillers; main media for horizontal sand mills |
| Medium-Small Size | Φ0.8~1.0 | 0.8~1.0mm | Fine dispersion for digital inkjet, dyes & paper coatings; medium-fine slurry; shot peening deburring for precision hardware |
| Small Size | Φ0.6~0.8 | 0.6~0.8mm | Sub-micron grinding; inkjet inks & ceramic pigments; precision shot blasting & matte finishing of stainless steel |
| Micro Beads | Φ0.4~0.6 | 0.4~0.6mm | Fine shot peening & polishing; surface finishing for thin & precision parts; ultra-fine dispersion of low viscosity slurry |
Hardness values for our zirconia and ZTA beads are measured as Vickers indentation hardness to ASTM C1327, the test method for advanced ceramics, and reported with the test load so they can be compared with your own incoming inspection data.




