Quanzhou Haopuqihang Industry Co., Ltd — Reliability Partner of Blasting Abrasives

WhatsApp: +86 180 6761 3312

Bearing Steel Grit | Abrasive Media for Shot Blasting & Surface Profiling

High-quality bearing steel grit with uniform hardness, low breakage rate. Widely used for metal surface cleaning, descaling, rust removal and shot blasting. Multiple grain sizes available for bulk export.

Bearing Steel Grit | Abrasive Media for Shot Blasting & Surface Profiling

Description: Bearing Steel Grit is premium angular metallic blasting abrasive made of Cr-alloyed steel. It is manufactured by quenching, crushing, tempering and size classification. Its microstructure is fine uniform tempered martensite with carbide grade <2. With chromium alloying, it features low breakage rate and long recyclable service life. Sharp angular edges provide strong cutting power and consistent anchor profile to improve coating adhesion. Three hardness grades available: GH (>60HRC), GL (53~60HRC), GP (40~50HRC). Widely used for heavy rust removal, scale stripping, old coating removal and surface preparation for shipbuilding, wind power, steel structures and heavy machinery. Available models: GH12, GH14, GH16, GH18, GH25, GH40, GH50, GH80. To know more abrasives.
Note: Ferrous material, prone to rust under humid environment. Not suitable for wet sand mill grinding. Compliant with SAE J1993 & GB/T18838.3. Custom hardness available.
  •  
  •  
  • Package:
  • 1000 kg, Super Bag or Sack
  • 25 kg (55 lbs), Paper Bag or Woven Polypropylene Bag
 
Physical Properties
ItemParameter
ShapeAngular
HardnessGH: >60 HRC (>710 HV) GL: 53~60 HRC (510~710 HV) GP: 40~50 HRC (377~540 HV)
Metallographic StructureFine uniform tempered martensite, carbide grade<2
True Density≥7.50 g/cm³
Chemical Composition
ItemTypical Index
Carbon (C)0.80 ~ 1.20 %
Silicon (Si)0.15 ~ 1.20 %
Manganese (Mn)0.20 ~ 1.20 %
Sulphur (S)≤0.05 %
Phosphorus (P)≤0.05 %
Chromium (Cr)0.60 ~ 1.60 %
Applications
Size GroupGH ModelSize RangeApplications
Extra Fine GritGH800.4mmLight rust removal for precision parts; fine anchor profile on thin steel plate; surface prep for thin coating systems
Small SizeGH50, GH400.6~0.8mmSandblasting for pipes & small steel structures; medium surface profile, primary grade for epoxy primer prep
Medium SizeGH25, GH181.0~1.2mmWind power & bridge steelwork; heavy rust & aged coating removal, standard anchor profile for PSPC anti-corrosion
Medium-Large SizeGH16, GH141.5~1.8mmDescaling of large castings & forgings; heavy anti-corrosion blasting for ship plate & containers
Large SizeGH122.0mmHeavy stripping of thick rust and old paint; deep anchor profile preparation for heavy industrial components
Note: Bearing Steel Grit is Cr-alloyed angular steel grit. Microstructure is fine uniform tempered martensite, carbide grade <2. Three hardness grades (GH/GL/GP) for different blasting requirements. It has lower wear loss than ordinary cast steel grit and delivers stable anchor profile. Ferrous material, easy to rust in moist environment. Not applicable for wet sand mill grinding.
Steel Grit Sieve Analysis
meshmmSteel grit mm
2.521.71.41.210.70.40.30.2
72.8all pass
82.36all pass
10280%minall pass
121.790%min80%minall pass
131.490%min80%minall pass
161.1890%min75%minall pass
18185%min75%minall pass
200.85
250.7185%min70%minall pass
300.6
350.580%min
400.42570%minall pass
450.355
500.380%min65%minall pass
800.1875%min65%min
1200.12575%min60%min
2000.07570%min
3250.045
SAEG-10G-12G-14G-16G-18G-25G-40G-50G-80G-120

High-carbon cast-steel grit is specified by chemistry and physical properties under SAE J1993, which covers blast cleaning and etching service; the G-size designation itself comes from SAE J444, so both are quoted together on our test certificates.