Manual Suction Blasting Equipment
Manual Suction Blasting Equipment
- A venturi gun draws abrasive up from the hopper, so the blast is gentler than a pressure-fed cabinet — the right choice for thin-wall parts, precision components and satin cosmetic finishes where you want to shape the surface, not cut it. Five cabinet sizes take workpieces from 30 cm to 100 cm, all at 0.6–0.8 MPa with a 7.5 kW compressor and automatic pulse cartridge dust removal. One operator, one nozzle, quick media changes for mixed batches.
- To know more equipment.
Manual Suction Blasting Equipment
| Model | Outer Chamber Size (MM) | Inner Chamber Size (MM) | Suitable Workpiece (CM) | Fan Power (W) | Working Pressure (MPa) | Air Compressor Config. (KW) | Dust Removal |
|---|---|---|---|---|---|---|---|
| NP-6050 | 900×600×1550 L×W×H | 500×600×500 | Within 30 CM | 250 W | 0.6–0.8 | 7.5 KW | Automatic pulse cartridge dust removal |
| NP-9060 | 1200×900×1640 L×W×H | 600×900×600 | Within 40 CM | 550 W | 0.6–0.8 | 7.5 KW | Automatic pulse cartridge dust removal |
| NP-9080 | 1210×900×1740 L×W×H | 800×900×700 | Within 60 CM | 550 W | 0.6–0.8 | 7.5 KW | Automatic pulse cartridge dust removal |
| NP-1010 | 1410×1000×1790 L×W×H | 1000×1000×750 | Within 80 CM | 750 W | 0.6–0.8 | 7.5 KW | Automatic pulse cartridge dust removal |
| NP-1212 | 1600×1200×1890 L×W×H | 1200×1200×800 | Within 100 CM | 750 W | 0.6–0.8 | 7.5 KW | Automatic pulse cartridge dust removal |
Enclosure-based abrasive blasting falls under the ventilation requirements of OSHA 29 CFR 1910.94(a), which call for an exhaust system made of a hood or enclosure, ductwork, a dust collector, an exhauster and a discharge stack.




