Quanzhou Haopuqihang Industry Co., Ltd — Reliability Partner of Blasting Abrasives

WhatsApp: +86 180 6761 3312

ZTA Composite Ceramic Balls | Zirconia Toughened Alumina Grinding Balls

ZTA ceramic balls combine high hardness and good toughness. Low wear rate, used as grinding media for sand mills and ball mills. Ideal for mining, coating, pigment and ceramic fine grinding. Multiple sizes available.

ZTA ceramic balls | Zirconia Toughened Alumina Grinding Balls

Description: Zirconia-Alumina Composite Balls (ZTA ceramic balls) are high-performance composite ceramic grinding media. Made of alumina matrix doped with stabilized zirconia powder, formed by isostatic pressing and high-temperature sintering. Zirconia phase realizes phase transformation toughening, greatly improving fracture toughness and impact resistance. It combines the high hardness & thermal stability of alumina and the high toughness of zirconia. Medium density, low wear rate and high cost performance. Widely used in wet/dry grinding of hard minerals, coatings, inks and ceramic raw materials. Fine beads for sand mills; large balls for ball mills and vibratory grinding. Available sizes: 0.4–5mm, Φ5mm, Φ6mm, Φ8mm, Φ10mm, Φ15mm. To know more abrasives.
Note: White color, low contamination for light-colored slurries. Better toughness than pure sintered alumina balls, lower cost than zirconia beads. Custom sizes available.
 
  •  
  •  
  • Package:
  • 1000 kg, Super Bag or Sack
  • 25 kg (55 lbs), Paper Bag or Woven Polypropylene Bag or Drum
 
Chemical Composition
ItemTypical Index
Aluminium Oxide (Al₂O₃)75.0 ~ 80.0 %
Zirconium Dioxide (ZrO₂)15.0 ~ 20.0 %
Silicon Dioxide (SiO₂)≤3.0 %
Ferric Oxide (Fe₂O₃)≤0.10 %
Magnesium Oxide (MgO)≤0.20 %
Other impurities≤1.70 %
Physical & Chemical Properties
ItemParameter
Mohs Hardness8.0 ~ 8.5
Vickers Hardness HV1100 ~ 1250
True Density4.20 ~ 5.20 g/cm³
Bulk Density2.30 ~ 3.10 g/cm³
Water Absorption< 0.01 %
ColorOff-white / milky white
ShapeSolid spherical balls, high sphericity
Chemical StabilityExcellent acid & alkali resistance, inert in most aqueous and organic slurries
Maximum Working TempUp to 1450 ℃
Crushing Strength≥1100N (Φ2mm)
Applications
Size GroupDiameter Spec mmSize RangeApplications
Ultra-fine Micro BeadsΦ0.4~0.6, Φ0.6~0.80.4~0.8mmHigh-energy horizontal sand mills; submicron fine grinding: titanium dioxide, kaolin & ceramic pigments; lab ultra-fine
Small SizeΦ0.8~1.0, Φ1.0~1.2, Φ1.2~1.40.8~1.4mmWet grinding for coatings, inks & pesticide suspensions; refining non-metallic mineral powder; main media for basket
Medium SizeΦ1.4~1.6, Φ1.6~1.8, Φ1.8~2.0, Φ2~3, Φ3~51.4~5mmHigh-speed stirred mills & sand mills; grinding of ground calcium carbonate, zircon powder & magnetic materials;
Medium-Large SizeΦ55mmBatch ball mills & vibratory mills; medium-coarse grinding for ores, refractory bodies & ceramic glazes
Large SizeΦ6, Φ86mm, 8mmRotary ball mills; medium coarse crushing of minerals, pre-grinding of ceramic raw materials
Extra Large SizeΦ10, Φ1510mm, 15mmCoarse grinding in large ball mills; mass finishing and deburring of workpieces
Note: Zirconia-alumina composite balls (ZTA) adopt zirconia phase transformation toughening technology. Better impact resistance than pure sintered alumina balls. White color, suitable for light-colored slurries. Available sizes: 0.4–5mm, Φ5mm, Φ6mm, Φ8mm, Φ10mm, Φ15mm. Fine beads for sand mill wet grinding; large balls for ball mill and vibratory grinding. Custom sizes available.

Hardness values for our zirconia and ZTA beads are measured as Vickers indentation hardness to ASTM C1327, the test method for advanced ceramics, and reported with the test load so they can be compared with your own incoming inspection data.